Safety Relays

Choosing Safety Relays components

Safety relays must match the safety function, performance level (PL or SIL), and circuit architecture of the original — substituting a different model is not just an electrical swap, it is a re-validation of the safety function. Always replace by exact OEM part number where possible, and re-document the safety function after any change.

Specs to confirm before ordering:

Exact OEM part number including all option suffixes
Number of safety outputs (often called "safety contacts" or "redundant outputs")
Number of auxiliary outputs (non-safety, for status to PLC)
Supply voltage: 24 VDC, 24 VAC, 115 VAC, 230 VAC
Input type: single-channel, dual-channel, dual-channel with cross-monitoring, OSSD inputs from light curtain
Reset behavior: manual, monitored manual, automatic
Performance level rating (PL d / PL e per ISO 13849, SIL CL2 / CL3 per IEC 62061)
Mounting: DIN-rail width (17.5 mm, 22.5 mm, 45 mm)

Common gotchas: a PNOZ X3 and PNOZ X3P look similar but have different reset behavior. The 440R-N23126 has 3 safety outputs; the -N23132 has 2 plus 2 timed. Mixing them changes the wiring diagram and the safety analysis. Configurable safety relays (Pilz PNOZmulti, MSR210P) require the original configuration file or a freshly engineered one — the unit alone is not a complete replacement.

Typical applications: emergency-stop monitoring on machine tools, light-curtain monitoring on press brakes and stamping presses, gate-interlock monitoring with guard locking, and safe stop / safe limited speed coordination with safety-rated drives. On legacy machines, the original safety relay was selected and documented as part of the machine's risk assessment; an exact replacement preserves that documentation chain.

For obsolete or discontinued safety relays, request a quote with the OEM part number.

Can I substitute a different safety relay if the OEM model is discontinued?

Sometimes, but it changes the safety function and requires re-validation per ISO 13849. The lower-effort path is sourcing the exact OEM part from surplus stock, which keeps the existing safety documentation valid.

Are these safety-certified to PL d / PL e?

The original OEM rating is preserved — surplus units retain their factory certification. We do not re-certify and we do not modify the device. The 12-month warranty covers functional failure, not the system safety case.

Do you stock obsolete Pilz PNOZ and Allen-Bradley 440R?

Yes. Legacy X-series and older 440R variants are sourced regularly. Send the full OEM number.

Will an AC-supply relay work on DC?

No. Safety relays are designed for a specific supply voltage and type. Mismatched supply will at best stop functioning and at worst damage the unit.

What is the lead time?

In-stock units ship same or next business day from St. Louis. Sourced units typically quote in 1–2 business days.

What is the warranty?

12-month functional warranty on the device. Safety-function validation in the application is the integrator's responsibility, independent of the device warranty.

Pilz 750330 Safety Relay

Pilz 750600 Safety Relay

Pilz 750601 Safety Relay

Pilz 751004 Safety Relay

Pilz 751008 Safety Relay

Pilz 751103 Safety Relay

Pilz 751107 Safety Relay

Pilz 773845 Safety Relay

Pilz 773846 Safety Relay

Pilz 773847 Safety Relay

Pilz 773854 Safety Relay

Pilz 773855 Safety Relay

Pilz 773856 Safety Relay

Pilz 773857 Safety Relay

Pilz 773858 Safety Relay

Pilz 773859 Safety Relay

Can't Find The Part You Need?